Resources and printing tips

Downloads and printing tips.

Free downloadable 3MF and STL files and practical print tips for Bambu Lab A1 and A1 mini printers, including clearances for slide-in fits and part orientation.

Tips for the Bambu A1 and A1 mini

  • The A1 bed is 256 × 256 × 256 mm and the A1 mini is 180 × 180 × 180 mm. Check the size readout before you export.
  • For slide-in fits, start with the default 0.2 mm clearance and adjust after a test print.
  • Lay parts on their largest flat face to cut down on supports.
  • Open the exported 3MF in Bambu Studio to choose filament, supports and slice settings.
  • Print a small test piece first when a part needs to fit another part.
  • Holes often print slightly small. Add 0.1 to 0.3 mm to the diameter if a pin or screw must pass through.

Supported file formats

  • Import: 3MF, STL, OBJ and GLB.
  • Export: 3MF (including Bambu multi-object), STL, OBJ and ZIP.
  • Projects: .sfproj.json files you can save and reopen.